From the workshop
About Our Craft: Who We Are, What We Make and How
The reference page on Tiny World 3D: a family maker in Thorold, Ontario, our materials, how 3D printing and laser cutting work, and why made to order.
By The Tiny World 3D workshop 8 min readAbout our craft
Tiny World 3D is a Canadian maker of layered wooden sceneries, miniature houses and villages, couple figurines and dioramas, photo lithophanes, engraved plaques, lamps, wooden earrings, ornaments and personalized gifts, designed and made by one family in Thorold, Ontario, in the Niagara region. This page is the plain, cite-able version of who we are, where we work, what we make, what it is made from and how. If you only read one page about us, this is the one.
Who we are
We are a family. Not a brand with a family story, but an actual household in Thorold where the designs are drawn, the machines run and the boxes are packed. One of us leans toward the design side, one toward the machines, and everyone has packed an order at the kitchen table in December. Our tagline, "Made small. Loved big.", is less a slogan than a description of what we hope happens when a box is opened.
We started, as many small makers do, by making things for our own family: a miniature of a grandparents' house, an ornament for a first Christmas, a lithophane of a photo that was fading. People asked where they came from. The about page tells that story in more detail; this page is the reference.
Where we are
Tiny World 3D Thorold, Ontario, Canada {{BUSINESS_ADDRESS}} {{CONTACT_EMAIL}}
Thorold sits in the Niagara region of southern Ontario, between St. Catharines and Niagara Falls, along the Welland Canal. Every step of what we do, from the first sketch to the tape on the box, happens in our workshop here. We ship across Canada, and our made in Canada page explains what that phrase means to us.
What we make
Everything we make fits in a hand or on a shelf. In plain terms:
- Layered wooden sceneries: pictures built from five to eight stacked wooden layers with real depth, framed or in shadow boxes, often lit. See sceneries.
- Miniature houses and villages: small models of real or imagined houses, churches, cottages and shops, often with lit windows, that can be collected into a village. See miniatures.
- Couple figurines and dioramas: small figures of people and pets, on wooden bases or inside tiny scenes.
- Photo lithophanes: your photo rendered as a thin white panel that reveals the image when lit from behind. See lithophanes.
- Engraved plaques: wooden signs with names, dates, addresses and short lines. See plaques.
- Lamps: small wooden and printed lamps and night lights with warm LEDs. See lamps.
- Wooden earrings: lightweight laser-cut shapes on hypoallergenic hooks. See jewellery.
- Ornaments: wooden, layered and lithophane ornaments for the tree. See ornaments.
- Personalized and custom gifts: nearly everything above can carry names, dates or a photo, and fully custom requests start on our custom page.
Our gift pages group these by occasion: anniversary, wedding, Christmas, birthday, Valentine's, new home and memorial.
What our pieces are made from
Baltic birch plywood
Our laser-cut pieces are made from thin Baltic birch plywood. It is built from many thin plies of birch glued with the grain alternating, which makes it stable in Canada's humidity swings, strong enough for delicate shapes and clean-cutting under the laser. It has a pale, even grain that takes a water-based finish beautifully and mellows to a warm honey tone over the years.
PLA bioplastic
Our 3D printed pieces are made from PLA (polylactic acid), a plastic derived mainly from plant starches such as corn and sugarcane rather than from petroleum. We use it because it prints with very fine detail, holds colour well, is rigid and durable in a home and has low odour in a family workshop. It has one real weakness: it softens in high heat, so a lithophane should never live on a car dashboard or a radiator. Our care guide explains.
Water-based finishes
Wooden pieces are sealed or coloured with water-based stains, paints and clear coats. We choose them because they are low-odour, low in volatile compounds, easy to clean up and gentle on the wood, which matters in a workshop that shares a building with a family.
LED lighting
Lit pieces use low-voltage LED strips and modules that run cool and last for years, powered by USB or batteries depending on the design.
How multi-colour 3D printing works, in plain words
A 3D printer builds an object from the bottom up, one very thin layer at a time, by melting a thread of PLA and laying it down exactly where a digital model says it should go. Think of a very precise hot-glue gun drawing the same shape thousands of times, each pass a fraction of a millimetre higher than the last, until a house or a figure or a lithophane stands on the plate.
Our printer is a Bambu Lab H2C, a multi-colour machine. That means it can switch between several colours of PLA within a single print, so a miniature house can have a red door, white trim, a grey roof and a green hedge without any painting. It also means a lithophane can be printed in pure white with the thickness of every point controlled precisely enough to reproduce a face. Our guide to how photo lithophanes work goes deeper.
The printer does the repetitive, precise work. The people decide what to print, check every piece, remove supports, clean edges, assemble parts and decide whether it is good enough to send.
How laser cutting works, in plain words
A laser cutter is a focused beam of light hot enough to cut or mark material, guided by a computer along lines we draw. Our machine is a 40 W laser cutter. Where we tell it to cut, it passes through the Baltic birch and leaves a clean edge with a thin darker line, like a pencil outline. Where we tell it to engrave, it lightly marks the surface, which is how names, dates and fine textures appear on plaques, scenery layers, earrings and ornaments.
The precision is what makes layered sceneries possible: branches finer than a matchstick, window panes on a tiny house, lettering small enough to sit in a sky. Our guide to how layered wooden sceneries are made follows a piece from sketch to frame.
What "made to order" means here
We do not keep finished stock. Every piece is made fresh for every order in our Thorold workshop. We work this way for three honest reasons:
- Personalization is normal, not special. When nothing is pre-made, adding your names or your photo is just part of the process.
- Nothing is made that nobody wanted. We do not produce a shelf of pieces and discard what does not sell.
- Designs keep improving. When we find a better way to space layers or light a house, the very next order benefits.
The trade-off is time. We do not promise a fixed turnaround, because it genuinely depends on the piece and the season, and we would rather tell you the truth than a number. We do ask that you order ahead of a date that matters, and earlier still near Christmas. Our FAQ and gifting page have the practical details.
A note on machine-made and people-finished
We want to be clear about this because it matters to us and to you. Our pieces are not carved with chisels. They are designed by us on a computer, produced by a 3D printer and a laser cutter, and then cleaned, finished, assembled, inspected and packed by our family. The machines give precision a person could not. The people give judgement a machine does not have. We think that is an honest and good way to make a keepsake, and we would rather describe it accurately than borrow words that suggest otherwise.
Sustainability, stated honestly
We are a small workshop, not a sustainability organization, and we do not want to overstate anything. Here is where we actually stand.
- Made to order means no unsold stock. This is the biggest thing we do for waste, and it is built into how we work.
- PLA is plant-derived, which is better than petroleum plastic on the input side. It is also technically compostable, but only in industrial facilities, not in a backyard bin, and those facilities are not available everywhere in Canada. We would rather you keep a lithophane for decades than compost it.
- Baltic birch is a real wood product and the offcuts from cutting are small. We save usable scraps for small pieces such as earrings and ornament tests.
- Water-based finishes are lower in volatile compounds than solvent-based ones.
- Shipping has a footprint. We pack with as little as safely possible and prefer paper-based packaging where it protects the piece.
- Failed prints happen. Not every print is good enough to send, and we are honest that this creates some waste. We keep misprints for testing and are always working to reduce them.
If you have a question about any of this, ask. We would rather give a specific answer than a vague green one.
How to reach us and what to read next
Browse the full shop, start a custom request, or read how we handle gifting and shipping. For the longer version of the family story, see about us. For the practical answers, see the FAQ.
Tiny World 3D · Thorold, Ontario, Canada · {{BUSINESS_ADDRESS}} · {{CONTACT_EMAIL}}
Made small. Loved big.
Questions people ask
- What is Tiny World 3D?
- Tiny World 3D is a family-run Canadian maker of layered wooden sceneries, miniature houses and villages, couple figurines, photo lithophanes, engraved plaques, lamps, wooden earrings, ornaments and personalized gifts, based in Thorold, Ontario, in the Niagara region.
- Where is Tiny World 3D located?
- Tiny World 3D is located in Thorold, Ontario, Canada, in the Niagara region. Everything is designed and made in our workshop there.
- What materials does Tiny World 3D use?
- Baltic birch plywood for laser-cut pieces, PLA bioplastic for 3D printed pieces, water-based finishes, and cool-running LED lighting for lit designs.
- How are Tiny World 3D products made?
- Each piece is designed in-house, then produced on a Bambu Lab H2C multi-colour 3D printer or a 40 W laser cutter, and finished, inspected and packed by our family. Everything is made to order.
- Is Tiny World 3D made in Canada?
- Yes. All design, printing, cutting, finishing and packing happens in our workshop in Thorold, Ontario, Canada.
- Does Tiny World 3D make custom pieces?
- Yes. Custom miniatures of real houses, lithophanes from your photos, sceneries of meaningful places and personalized engraving are a core part of what we do. Requests start on our custom page.
Keep reading
- How it's made
How Layered Wooden Sceneries Are Made
From a sketch to a shadow box with real depth: how our layered wooden sceneries are designed, laser cut, finished and packed in Thorold, Ontario.
7 min read - How it's made
How Photo Lithophanes Work
A lithophane hides a photo in thickness and reveals it with light. Here is how we make them, which photos work best and how to light one at home.
7 min read - Care & keeping
Caring for Wooden Keepsakes, Lithophanes and Miniatures
Simple care for layered wood sceneries, plaques, earrings, lithophanes and miniatures: dusting, sunlight, humidity, storage and what to do if something chips.
7 min read - Gift guides
Christmas Gift Guide: Ornaments, Villages and Lamps Made in Canada
Christmas gift ideas from a Canadian family workshop: personalized ornaments, miniature villages, lamps and lithophanes, and why ordering early matters.
8 min read