Gift guide
Caring for Wooden Keepsakes, Lithophanes and Miniatures
Simple care for layered wood sceneries, plaques, earrings, lithophanes and miniatures: dusting, sunlight, humidity, storage and what to do if something chips.
By The Tiny World 3D workshop 7 min readCare & keeping
A keepsake earns its name by staying. The ornament that comes out every December, the lithophane on the bedside table, the little house on the mantel: these are objects meant to outlast the moment they were given for. The good news is that caring for them is easy. Wood and PLA are both forgiving materials in a normal Canadian home. This guide covers the few things that matter.
Tiny World 3D is a Canadian maker of layered wooden sceneries, miniature houses, photo lithophanes, engraved plaques, lamps, wooden earrings and ornaments, designed and made in our family workshop in Thorold, Ontario. Everything here is what we tell our own families about the pieces in their homes.
What are our keepsakes made of?
Knowing the material makes care obvious.
- Baltic birch plywood is used for sceneries, plaques, ornaments, earrings, lamp bases and frames. It is stable, strong and shows a warm, even grain. It is sealed or coloured with water-based finishes.
- PLA bioplastic is used for lithophanes, miniature houses, figurines and many lamp shades and details. It is a plant-derived plastic that prints with fine detail and is sturdy in normal use, but it softens in high heat.
- Warm LED lights are used in lit pieces. They run cool and last for years.
Our about our craft page describes the materials and the machines in more detail.
How do I dust a layered wooden scenery?
The gaps between the layers are what give a scenery its depth, and they are also where dust settles. A soft, dry brush is the best tool: a clean paintbrush, a makeup brush or a soft toothbrush all work. Sweep gently from the top down so the dust falls out the bottom. A gentle puff of air from a camera blower or a soft breath also works.
What to avoid:
- Water and damp cloths. Moisture raises the wood grain and can lift water-based finishes.
- Furniture polish and sprays. They leave residue in the engraved areas and can darken the wood unevenly.
- Compressed air from a can. Too forceful, and the propellant can leave a cold mark.
- Vacuum attachments directly on the piece. The suction can catch delicate branches.
Framed sceneries behind glass need only the glass wiped. Shadow boxes with an open front need the occasional brush.
Where should I display wooden pieces?
Light
Wood changes slowly in sunlight. Baltic birch tends to mellow to a deeper honey tone over years, which many people love, but direct, all-day sun will do it unevenly and will fade coloured layers and paint. Indirect light is ideal. A wall opposite a window is better than the windowsill itself for coloured or engraved pieces. Natural, unstained wood is the most forgiving.
Humidity
Canadian homes swing from humid summers to very dry, heated winters. Plywood handles this far better than solid wood because its plies are crossed, which is one reason we use it. Even so, avoid steamy bathrooms, the spot above a kettle or stove, and uninsulated garages. If you run a humidifier in winter, your keepsakes will thank you as much as your skin does.
Heat
Keep wooden pieces away from heat vents, radiators and fireplaces. Sudden heat can dry and warp thin layers. This matters even more for PLA, below.
How do I care for a lithophane?
Lithophanes are printed in white PLA. The detailed side has thousands of tiny ridges that make the image, and those ridges hold dust.
- Dust with a soft, dry brush or cloth. Work gently; you are not scrubbing, just lifting.
- For fingerprints, a cloth very lightly dampened with water, followed immediately by a dry cloth, is fine. Avoid solvents, alcohol wipes and abrasive cleaners, which can cloud the surface.
- Heat is the one real enemy. PLA softens well below boiling temperatures. A lithophane left on a car dashboard in July, on a radiator, or against a hot halogen bulb can warp. LED lights, including the warm LED bases we supply, run cool and are completely safe. Room temperature, windowsills and ordinary lamps are all fine.
- Backlighting in a window is lovely and safe; the daylight does no harm to PLA at normal temperatures.
Our guide to how photo lithophanes work covers lighting choices in more detail.
How do I care for miniature houses and figurines?
Miniatures combine PLA details with wooden bases and sometimes tiny LED lights.
- Dust with a soft brush. Small features such as railings, chimneys and figures are sturdy but not indestructible; brush rather than wipe.
- Lift by the base, not by the roof or a figure.
- Keep them above the reach of toddlers and the tails of cats, which is advice for the house as much as the miniature.
- For lit houses, follow the small card included with the piece for battery or USB power. Replace batteries before storing for a season so they do not leak.
How do I care for wooden earrings?
Wooden earrings are light, which is their charm, and they live a harder life than anything on a shelf.
- Put them on last, after hairspray, perfume and lotion have dried.
- Take them off before swimming, showering or sleeping.
- Wipe with a dry cloth after wearing.
- Store flat in a small box or pouch rather than hanging in a tangle, which protects the thin shapes.
- The sterling or hypoallergenic hooks can be cleaned the way you clean any jewellery; keep the wooden part dry.
How do I care for engraved plaques?
Indoors, a plaque needs only occasional dusting. Engraved lettering can be brushed with a soft brush if dust gathers in the letters.
Outdoors is the question we get most. Baltic birch sealed with a water-based finish is happiest in a sheltered location: a covered porch, an entryway, inside a storm door, a garden shed wall under an eave. It is not designed for full exposure to Canadian rain, snow and summer sun; left out, it will grey and eventually delaminate. If you want a plaque outside, give it shelter and bring it in for winter, or ask us about options on the custom page.
How do I care for lamps and lit pieces?
- Use the supplied LED and power source. Our lamps and lit sceneries are designed around cool-running LEDs. Do not substitute an incandescent or halogen bulb; the heat can damage both PLA and wood.
- Unplug before cleaning.
- Dust the shade with a soft brush and the base with a dry cloth.
- If a USB cable or adapter fails, any standard replacement of the same type is fine; contact us if you are unsure.
How should I store seasonal keepsakes?
Ornaments, Christmas villages and holiday sceneries spend most of the year in a box, so the box matters.
- Wrap each piece in acid-free tissue or soft paper. Avoid newspaper, which can transfer ink.
- Use a rigid box with a little padding so pieces do not knock against each other.
- Store at room temperature, somewhere dry. A closet or under a bed is ideal. Avoid attics, which bake in summer, and basements that get damp in spring. Heat is especially important for PLA ornaments and lithophanes.
- Remove batteries from any lit pieces before storing.
- Label the box. Future you, in a December hurry, will be grateful.
What if something breaks?
Thin wooden branches and tiny PLA details are sturdier than they look, but accidents happen.
- A layer comes loose in a scenery: a tiny amount of wood glue or clear craft glue on the spacer, held gently for a minute, usually fixes it. Less glue than you think.
- A small chip or snapped branch: keep the piece and contact us with a photo. Because every design is ours, we can often tell you the simplest fix or replace a single layer.
- A lithophane warped from heat: unfortunately this cannot be reversed, but we can print the same photo again. Reach out and we will help.
- A light stops working: check the battery or cable first; it is nearly always one of those two.
Our FAQ covers how to reach us.
A small reassurance
These pieces are made to be lived with, not kept behind glass. Children pick up the tiny houses. Grandparents hold lithophanes up to the window. Ornaments get hung by small hands. That is exactly what we hope for. A little dust is a sign a keepsake is where it should be. With the few habits above, the things we make in our Thorold workshop will be in your family for a very long time.
Made small. Loved big.
Questions people ask
- How do I clean a layered wooden scenery?
- Use a soft, dry brush such as a clean paintbrush or makeup brush to lift dust from between the layers, or a gentle puff of air. Avoid water, sprays and polish, which can raise the grain or leave residue.
- Can wooden keepsakes go in direct sunlight?
- Brief sun is fine, but all-day direct sunlight will slowly lighten or yellow wood and fade colours. Choose a spot with indirect light, especially for coloured and engraved pieces.
- Are 3D printed lithophanes heat sensitive?
- Yes. PLA bioplastic softens in high heat, so keep lithophanes out of parked cars in summer and away from radiators, stoves and hot bulbs. Normal room temperatures and LED lights are completely fine.
- Can wooden plaques be hung outside?
- Only in a sheltered spot such as a covered porch or inside a storm door. Baltic birch with a water-based finish is not meant for full exposure to Canadian rain, snow and sun.
- How should I store ornaments and miniatures between seasons?
- Wrap each piece in tissue, box them with a little padding, and store them somewhere dry at room temperature. Avoid hot attics and damp basements.
- What if a piece chips or a layer comes loose?
- Contact us with a photo. Small repairs are often simple, and because every piece is designed in our workshop we can usually advise or help.
Keep reading
- How it's made
How Layered Wooden Sceneries Are Made
From a sketch to a shadow box with real depth: how our layered wooden sceneries are designed, laser cut, finished and packed in Thorold, Ontario.
7 min read - How it's made
How Photo Lithophanes Work
A lithophane hides a photo in thickness and reveals it with light. Here is how we make them, which photos work best and how to light one at home.
7 min read - About our craft
About Our Craft: Who We Are, What We Make and How
The reference page on Tiny World 3D: a family maker in Thorold, Ontario, our materials, how 3D printing and laser cutting work, and why made to order.
8 min read - Gift guides
Christmas Gift Guide: Ornaments, Villages and Lamps Made in Canada
Christmas gift ideas from a Canadian family workshop: personalized ornaments, miniature villages, lamps and lithophanes, and why ordering early matters.
8 min read