How it's made
How Layered Wooden Sceneries Are Made
From a sketch to a shadow box with real depth: how our layered wooden sceneries are designed, laser cut, finished and packed in Thorold, Ontario.
By The Tiny World 3D workshop 7 min readHow it's made
The short version
Choose the scene and the story behind it
We start with the feeling the piece should carry, then sketch a scene that tells that story, whether it is a Niagara landscape, a forest at dusk or a couple's special place.
Draw the scene as separate depth layers
The artwork is split into five to eight layers, each one a flat silhouette. Foreground trees, a middle hill, a distant skyline and a sky layer are drawn as individual vector files.
Cut every layer from Baltic birch plywood
Each layer is cut on our 40 W laser cutter from thin Baltic birch plywood. The laser follows the vector lines precisely, so even fine branches and tiny windows come out clean.
Clean and finish each layer
Layers are brushed free of residue, lightly sanded where needed and sealed or coloured with water-based finishes so the wood grain still shows.
Add any personalization
Names, dates or a short line are engraved on a layer or the base before assembly, so the words sit inside the scene rather than on top of it.
Stack and space the layers
Layers are assembled front to back with small spacers between them. The gaps are what create the shadows and the sense of looking into a tiny world.
Frame, light and inspect
The stack is set into its frame or shadow box, optional LED lighting is fitted behind the back layer, and the whole piece is checked by a family member before packing.
Pack it to travel safely
Each scenery is wrapped, cushioned and boxed so it arrives ready to hang or stand, with a small card explaining how to care for it.
There is a moment, when you hold a layered wooden scenery up to a window, that it stops being a picture and becomes a place. The light slips between the layers, the trees in front throw real shadows on the hills behind, and for a second you are standing at the edge of a tiny forest. That moment is the whole reason we make these.
Tiny World 3D is a Canadian maker of layered wooden sceneries, miniature houses, lithophanes and personalized keepsakes, designed and made in our family workshop in Thorold, Ontario. This guide walks through exactly how a layered scenery comes together, from the first sketch to the box that arrives at your door.
What is a layered wooden scenery?
A layered wooden scenery (sometimes called a laser-cut shadow box, a 3D wood art piece or a multi-layer wood picture) is an image built from several flat sheets of wood stacked one behind the other with small gaps between them. Each sheet carries one part of the scene: the nearest trees, the lake, the far hills, the moon. Because the layers are physically separated, the piece has true depth. It changes with the light in the room and with where you stand.
It is a very old idea (paper tunnel books and theatre dioramas work the same way) made possible in wood by precise laser cutting. Our versions live in a frame or a shadow box, and many of them can be lit from behind so they glow in the evening.
How we design a scene
It starts with a feeling, not a file
Every scenery in our collection began as a conversation at the kitchen table about a feeling: the hush of a snowy lane, the first warm evening of summer on the Niagara Escarpment, the way a city skyline looks when you are driving home. We sketch that feeling first and only then worry about how to build it.
For custom pieces, the feeling comes from you. A couple's first apartment, the dock at the family cottage, the mountain they got engaged on. If you can describe it, or send us a photo, we can usually turn it into layers. You can start that conversation on our custom page.
Splitting the picture into depth
The craft of a good layered scene is deciding what goes on which layer. A typical design uses five to eight layers:
- A foreground layer with the boldest shapes: a fence, a pair of pine trees, a figure on a bench.
- One or two middle layers that carry the body of the scene, such as the shoreline, the houses or the rolling hills.
- Background layers for distant ridges, a skyline or a treeline that softens toward the horizon.
- A sky layer at the very back, which is often where the moon, the stars or an engraved message lives.
Each layer is drawn as a vector file, which is just a precise outline the laser can follow. We spend a lot of time here making sure that every piece of every layer is connected to something, so there are no floating islands that would fall out when cut, and that the shapes on one layer frame the layer behind in an interesting way.
How the layers are cut
Why Baltic birch plywood
We cut our sceneries from thin Baltic birch plywood. It has a lot of thin plies with very few voids, which means it stays flat, cuts with a clean edge and shows an even, honey-coloured grain. It is also strong enough that delicate branches and tiny window frames survive handling.
What the laser does
Our 40 W laser cutter is essentially a very fine, very hot pencil that follows the vector lines we drew. It cuts all the way through the wood where we want a silhouette and only lightly marks the surface where we want engraving. The same machine that cuts the outline of a maple tree can engrave two names on the base, which is why personalization fits so naturally into these pieces.
Laser cutting leaves a faint, darker edge on the wood. Some people call it a burnt edge; we think of it as a pencil line. It helps each layer read clearly against the one behind it, and it is part of the look of a laser-cut piece. Where we want a lighter effect, we mask the surface before cutting.
Finishing, assembling and lighting
Finishing each layer
Once cut, every layer is brushed clean of any residue and checked for loose fibres. Depending on the design, layers are left natural, sealed with a clear water-based finish, or coloured with water-based stains and paints so the wood grain still shows through. We prefer water-based products because they are low-odour, easy to work with in a family workshop and gentle on the wood.
Adding names and dates
If a piece is personalized, the engraving is usually done before assembly. That way a name or a date sits inside the scene, on the sky layer or along the base, rather than looking like a label stuck on afterward. For ideas on what to write, our anniversary gift guide and memorial keepsakes guide both have suggestions.
Stacking the layers
Assembly is where the magic happens. The layers are stacked front to back with small spacers between them. Those gaps, only a few millimetres each, are what make the shadows. We check the alignment at each step so that a path on one layer leads naturally into the layer behind it.
Light, frame and a last look
Lit sceneries get a warm LED strip tucked behind the back layer, with a cable run discreetly out through the frame. Then the stack is fitted into its frame or shadow box. Before anything is packed, one of us picks it up, turns it in the light and looks at it the way you will. If it does not make us smile, it does not leave.
Why we make every scenery to order
We do not keep a warehouse of finished pieces. Each scenery is made fresh for every order in our Thorold workshop, which means:
- Your piece can be personalized without being a special case.
- We are not throwing away stock that did not sell.
- The design can keep improving. If we find a better way to space the layers, the next order gets it.
Because of this, we always suggest ordering a little ahead of a date that matters. Our gifting page explains how we handle gift notes and shipping to someone else's address.
How to choose a layered scenery
For a wall or a shelf?
Framed sceneries are designed to hang like a picture. Shadow-box versions are deeper and happier standing on a shelf, a mantel or a bedside table, especially if they are lit.
Lit or unlit?
An unlit piece is quieter and reads beautifully in daylight. A lit piece becomes something else after dark: a night light for a child's room, a soft glow in a hallway, a little window into somewhere peaceful. If the scenery is a gift for a new home, lit versions tend to become the piece people show guests.
Natural or coloured?
Natural wood gives a calm, monochrome look where everything is about shape and shadow. Coloured layers (a deep blue sky, a sunset gradient, snowy white hills) feel more like a painting. Neither is better. It depends on the room and the person.
Caring for your scenery
Layered wood is sturdier than it looks, but it is still wood and it still has gaps that collect dust. A soft brush or a gentle puff of air every so often is all it needs. Keep it out of direct, all-day sunlight and away from steamy bathrooms. We go into more detail in caring for wooden keepsakes.
Where our sceneries come from
Everything described here happens in one place: our family workshop in Thorold, Ontario, in the Niagara region. The designs are ours, the cutting and finishing happen here, and the person who packs your order is one of us. If you would like to know more about the people and the tools behind the work, our about page and our made in Canada page tell the rest of the story.
Made small. Loved big.
Questions people ask
- What is a layered wooden scenery?
- A layered wooden scenery is a picture built from several flat wooden layers stacked with small gaps between them. Each layer is a different part of the scene, so when you look at it you see real depth and shadow, not a printed image.
- What wood are Tiny World 3D sceneries made from?
- Our sceneries are cut from thin Baltic birch plywood, chosen because it cuts cleanly, stays flat and shows a warm, even grain. Finishes are water-based.
- Are layered sceneries made by machine or by people?
- They are made to order in our Thorold workshop. The layers are cut by a laser cutter from our own designs, then finished, assembled, inspected and packed by our family.
- Can a layered scenery be personalized?
- Yes. Names, a date, coordinates or a short message can be engraved on a layer or the base. Many customers ask for the skyline of a meaningful city or the shape of a favourite lake.
- Do layered sceneries come with lighting?
- Many of our shadow-box sceneries can be ordered with a warm LED strip behind the back layer, which turns the piece into a soft night light. Unlit versions are also available.
- How many layers does a scenery have?
- Most of our designs use between five and eight layers. Fewer layers give a bold, graphic look; more layers give a softer, more atmospheric depth.
Keep reading
- About our craft
About Our Craft: Who We Are, What We Make and How
The reference page on Tiny World 3D: a family maker in Thorold, Ontario, our materials, how 3D printing and laser cutting work, and why made to order.
8 min read - Care & keeping
Caring for Wooden Keepsakes, Lithophanes and Miniatures
Simple care for layered wood sceneries, plaques, earrings, lithophanes and miniatures: dusting, sunlight, humidity, storage and what to do if something chips.
7 min read - Gift guides
Anniversary Gift Guide: Keepsakes by Milestone Year
Anniversary gift ideas by milestone year, from paper to gold, with wooden keepsakes for the fifth and personalization ideas for every couple.
8 min read - Gift guides
New Home Gift Guide: Housewarming Gifts That Stay
Housewarming gift ideas that last: a miniature of their house, engraved plaques, lit sceneries, plus a plain-language guide to housewarming etiquette in Canada.
8 min read